The machine is applicable to the hole locking of various button holes of formal suits, overcoat, work suits and trousers of different thickness.
Reach a maximum sewing speed of 2500rpm, increasing production efficiency.
Beautiful thread trace, may sew top-grade products.
The wide machine mouth will deal with cloth materials on a flat surface.
Operation board of easy manipulation.
Equipped with sunken machine head, which may reduce operator's fatigue.
The shapes of button holes are operated by computer program and may be freely adjusted.
|
>>Specifications ＆ Parameter
|
|
Size
|
01
|
|
Stream thread cutting device
|
Stream thread cutting device
|
Long line cutting
|
|
Bottom thread cutting device
|
Long line cutting
|
|
Main use
|
Men's clothing, casual clothing
|
|
Other use
|
Suit-dress, jeans trousers, trousers
|
|
Function
|
The cutting device will cut all thread heads to a great extent. May grasp the thread tails from a long distance more safely during the sewing process. Very suitable for precisely cutting thread heads of manual cutting.
|
|
Sewing shape
|
|
|
Sewing length
|
Round-head eyehole8-42mm Straight button hole5-42mm
|
|
Press foot length (standard)
|
30mm
|
|
Shim length (standard)
|
22mm
|
|
Shim length (attachment)
|
30mm
|
|
Sewing speed
|
1.000- 2.500rpm
|
|
Needle code
|
0.5-2.0mm
|
|
Zigzag sewing width
|
1.5 5.0mm(In mechanical conditions, it is 4.0mm wide at most and the zigzag sewing width is 5.0 at most.)
|
|
Zigzag sewing width(factory-leaving setting)
|
2.5mm
|
|
Length or fastened sewing of stream line
|
0-20mm
|
|
Press foot height
|
Standard height is 12mm (may reach 16mm at highest)
|
|
Start-off made
|
Double pedal switch
|
|
Cloth-sending device
|
Intermittent cloth-sending of 3 pulse motors
|
|
Machine needle 4
|
DO×558Nm80 -Nm120
|
|
Machine needle (factory-leaving setting) *5
|
DO×558Nm90
|
|
Languages supported by operation board
|
English, Chinese
|
|
Safe setting
|
If there are any problems, the inner setting with urgent stop function and driven by safe circuit will automatically stop machine.
|
|
Upper shaft motor
|
AC servo motor 550W
|
|
Air pressure
|
Main regulator: 0.5Mpa Hammer-pressure regulator: 0.4Mpa
|
|
Air consumption volume
|
43.2 liter/minute (8 cycles/minute)
|
|
Weight
|
Machine head: 120kg operation panel: 0.6kg Control box: 14.2-16.2kg
|
|
Power/power consumption
|
Single-phase: 100V/200V Three-phase: 200V/220V/380V/400V,400VA
|
|
